造成井盖装置质量缺点的几种常见操作,看看你中招了没有?

造成井盖装置质量缺点操作_四川井盖生产厂家_成都井盖厂家

      井盖是我们生活中常见的东西,随处可见,作用也很重要。安装井盖时,如果有偏差,井盖座的砂浆会不饱满,垫得乱七八糟,井盖座下面会有很大的空隙。可见,井盖的安装也是一项非常重要的工作。边肖整理了几个井盖装置的问题操作,看看有没有猫腻:

造成井盖装置质量缺点操作_四川井盖生产厂家_成都井盖厂家

      操作一:先在井盖上铺水泥砂浆,然后浇筑周边混凝土。甚至有人用水泥砂浆代替浇筑混凝土。这种方法不适合精确调整井盖的高度,必须反复调整。而且水泥砂浆不易与井盖座紧密连接,容易形成设备开放空间。

      操作二:先用垫块调整好井盖标高,再灌水泥砂浆,然后浇筑混凝土。这种方法乍一看没什么问题,但一旦井盖座与井筒装置基础面的间距过小,就很难灌满混凝土,也很难保证质量。目前路面很多井盖下沉较大的问题,大多是这种操作造成的。

       操作三:用混凝土井盖座圈安装井盖装置时,在浇筑混凝土前,井盖下不使用水泥砂浆,甚至只用钢筋头作为井盖下的垫层。这种方式会导致井盖下有空地,在车辆的重压下容易变形移位。

      目前,在道路工程和管道工程的实施标准中,没有单独的设置井盖装置的标准,而且装置多种多样,操作人员在施工时往往独立完成工作,很多施工单位不清楚排水标准对井盖装置的规定,导致路面上出现很多“隐性井盖”。

声明:我方转载此文是出于传递更多信息的目的。如果有来源标注错误或侵犯了您的权益,请作者持证明与本网联系,我们将及时更正、删除,谢谢您。 邮箱地址:2595602486@qq.com

 四川井盖生产厂家    成都井盖厂家

如您有意咨询请给我们君见玮致电
我们期待您的来电!

咨询电话:18733020585

井盖类型非常的多,像是上水井盖、污水井盖、雨水井盖、雨水箅子、电力井盖、路灯井盖、通信井盖、电信井盖、热力井盖、燃气井盖、电缆井盖、化粪池井盖等等。不同的井盖有不同的功能,上水井盖是供水用的井盖,下水井盖则主要是用来排除掉路面上的积水的。像湖南甄金井盖的类型,有不锈钢井盖、铸铁井盖、复合树脂井盖等类型,铸铁井盖中,球墨铸铁圆井和铸铁沟盖板使用的较多。因为路面上的车辆多,而球墨铸铁井盖的承压能力比较好,公路上使用的多的就是这类型井盖了,而且井盖的类型也多。

There are many types of well covers, such as water supply well covers, sewage well covers, rainwater well covers, rainwater grates, power well covers, street lamp well covers, communication well covers, telecommunications well covers, thermal well covers, gas well covers, cable well covers, septic tank well covers, and so on. Different manhole covers have different functions. The upper manhole cover is used for water supply, while the lower manhole cover is mainly used to remove water from the road surface. There are various types of manhole covers such as stainless steel manhole covers, cast iron manhole covers, and composite resin manhole covers. Among the cast iron manhole covers, ductile iron round wells and cast iron trench covers are more commonly used. “Because there are many vehicles on the road, and the pressure bearing capacity of ductile iron manhole covers is relatively good, this type of manhole cover is commonly used on highways, and there are many types of manhole covers.”

球墨铸铁井盖球墨铸铁产品的一种,球墨铸铁通过球化和孕育处理得到球状石墨,有效地提高了铸铁的机械性能,特别是提高了塑性和韧性,从而得到比碳钢还高的强度。球墨铸铁是20世纪五十年代发展起来的一种高强度铸铁材料,其综合性能接近于钢,正是基于其优异的性能,已成功地用于铸造一些受力复杂,强度、韧性、耐磨性要求较高的零件。球墨铸铁已迅速发展为仅次于灰铸铁的、应用十分广泛的铸铁材料。所谓“以铁代钢”,主要指球墨铸铁。

Ductile iron manhole covers are a type of ductile iron products. Spheroidal graphite is obtained from ductile iron through spheroidization and inoculation, effectively improving the mechanical properties of cast iron, especially its plasticity and toughness, resulting in higher strength than carbon steel. Ductile iron is a high-strength cast iron material developed in the 1950s. Its comprehensive performance is similar to that of steel. It is precisely based on its excellent performance that it has been successfully used to cast some parts with complex stress and high requirements for strength, toughness, and wear resistance. Ductile iron has rapidly developed into a widely used cast iron material, second only to gray iron. The so-called “replacing steel with iron” mainly refers to ductile iron.

不锈钢井盖是用于工业与民用建筑区内部的室外窨井。能够称心高级小区铺设路碴、大理石花岗岩,一切产品都可敞开板盖板,能够用于给排水井、通风井、电缆井、表面井等,是由井框与井盖组成。

“高分子井盖是采用不饱和聚脂树脂为基体的纤维增强热固性复合材料,用压制成型技术制成,是一种新型的环保型井盖。” 

绿色环保:不生锈、绿色环保、节约不可再生资源。
防盗功能强:高分子井盖系复合材料具有不可再生性,不能回收利用,因而具有主动免被盗功能。
平衡能力好、承压力强:盖座咬合精度高,配合性好提高了道路的通行能力和行车舒适度。
日常维护简便、费用低:重量轻、防盗窃、寿命长、易识别,便于日常的开启和维护,有效降低了养护的劳动强度和更新费用的支出。

“树脂井盖(也叫 高分子玻璃钢井盖/复合材料井盖)是一种以以玻璃纤维及其制品(玻璃布、带、毡、纱等)作为增强添加材料,以合成树脂作基体材料,主要由不饱和聚酯树脂、填料、引发剂、增稠剂、低收缩添加剂、膜模剂、颜料及增强材料等组成,然后高温模压成型的一种新型井盖产品。 
主页
联系我们
菜单
返回
×
Scroll to Top